| Specifications |
CHARACTERISTICS
| Carrier : Tracks mounted |
| Drilling techniques : DTH, Rotary, Rotary |
| Drilling applications : Geothermal Overburden Drilling, water and geothermal wells, construction |
Weight and Dimensions
| Length……9.57m <> 31.41ft |
| Width……..3.00m <> 9.84ft |
| Height…….3.53m <> 11.58ft |
| Weight….approx. 20412kg <> 45000lbs (w/out pipe on board) |
Undercarriage & Chassis
| Tracks mounted steel shoes |
| Tracks mounted Heavy duty rubber pads (On request) |
| Track length: 3.48 m <> 137’’ |
| Track shoes width: 500 mm <> 19.7” |
| Pressure applied brake system |
| Heavy duty link profile |
| Gradability 19° <> 35% |
| Ground clearance 380 mm <> 15” |
| (4) Heavy duty hydraulic out-riggers (2 front & 2 rear) |
| Travel speed: 4.4 km/h <> 2.6 mph |
Power Unit
| Cummins electronic diesel engine model QSX11-4cyl. (24 volts) turbocharged water
cooled |
| Power 400hp – 297.8kw @ 1800rpm |
| Fuel consumption «Operation» 45 L/hr <> 11.89 gal/hr |
| Fuel tank 681 L. <> 180 galls |
| Filtering system two stage (Primary @ security) |
| Emission certification: U.S. EPA Tier 3, EU Stage III |
| Integrated control safety panel, 24 volts |
Compressor
| Heavy duty single stage rotary screw |
| Rated capacity: 500cfm <>14.2cu.m. |
| Pressure: 200psi <>13.8bar |
| Mechanical air load c/w silicone pad heather control (Cyl. & Receiver pressure regulator) |
| Controls: Pressure & temperature gauge, air filter maintenance indicator |
Compressor Safety device
| Discharge temperature |
| Receiver pressure |
| Inter stage pressure |
| low oil pressure |
| Minimum pressure valve |
| Pressure relieve valve |
Hydraulic power unit & components
| Pump drive: Two (2) variable displacement piston pumps, load sensing, pressure
compensated, and one (1) gear pump dedicated for accessories. |
| Hydraulic tank capacity 227 L. <> 60 gall. |
| Hydraulic oil cooler |
| Filtration system (5 micron) |
| Body valves assembly for complete controls (Tram, positioning and drilling) |
| Air loading actuator |
| Hold back “Flow & pressure” system control |
| Auto-pressure mechanical hammer lubricator
(Capacity 22.7 L <> 6 gall) |
| Mechanical thread greaser (Option) |
| Winter heating system package (Option) |
| Hose and fittings type « seal lock » |
| Integrated safety system, over heat, low levels etc. |
Mast & Feed Assembly
| Dump (0 to 100° from the horizontal) |
| Specific heavy duty mast structure designed for pipe 6.00 m <> 20’ |
| Mast extension: (40” pin #1) & (74” pin #2) |
| Feed system hoisting and pull-down power is provided by link- chain,
hydraulic gear box controlled hydraulically for accurate trust |
| Pull down / Pull back force: (21000lbs <> 93.4kN) |
| Top drive mounting plate is equipped with urethane anti-wear slides |
| Cutting deflector /collector joint with “Flex-ridged system” |
| Jib hydraulic winch 544 kg <> 1 200 lbs |
Remote control
| Full “Radio Remote” for complete operation |
Head EURODRILL model RH400
| Torque capacity type motor 103: 2674lbf-ft <> 362daNm at 0-110rpm |
| Torque capacity type motor 103: 1336lbf-ft <> 181daNm at 0-220rpm |
| Max rotation speed: 0- 220 rpm |
| Working pressure: 3650psi <>250bar |
| Swivel passage: 2“ <> 50.8mm |
| Drive flange type |
| Floating spindle (Option) |
Double Break-out & Clamps: hydraulic jaws
| Hydraulic swing clamping retractable jaws (Torque 9,980daN <>
22,436lbf) |
| Hydraulic holding clamps retractable jaws (Force 26,049daN <>
58,560lbf) |
| Manual centralizer |
| Min-Max opening (60-222 mm <> 2.3” -8¾”) |
Water Injection Pump
| Model FMC L04 |
| Double piston pump, Complete filtering system |
| Volume; 34 L/min <> 9 gal/min |
| Pressure: 38 bar <> 550 psig |
| Revolution speed: 900 rpm |
| Water tank stainless steel 454L<>120gall |
Rod handling & Feeder
| Mechanical rod handling pipe manipulator (6m x 20ft long) |
| On board pipe storage (Qty 33 pipes = 200m) |
Out-riggers
| Heavy duty |
| Hydraulic |
| Two (2): Front out riggers c/w integrated security lock (Fixed) |
| Two (2): Rear out riggers c/w integrated security lock (Fixed) |
Noise less Insulated Cab
| Rotary swing for better operation |
| Vibration isolated seat and seat belt |
| Sound insulation invironment |
| All funtion are controlled on radio remote |
| Windshield double wiper |
| Working light for extended hours |
Optional Equipment
| Mechanical thread grease |
| Winter heating system package |
| Floating spindle |
| Water tank Stainless steel |
| Operator thermal swing cab mounted |
Shipping
| Overseas packaging: 40 ft container |
| Inland shipment: Flatbed |
* Some of the features are optional
** Subject to ground conditions, compressor or water / mud pump capabilities, type and a quality of drilling equipments used and driller skills |
|
