DRILL RIG ACCESSORIES

Reverse Circulation Rods

Grid List

Set Ascending Direction

1-10 of 26

Page:
  1. 1
  2. 2
  3. 3
  1. DIVERTER SYSTEM
    -With compression-lock is adaptable to all casing sizes up to 8-5/8"
    -With male T.H.D. is adaptable to all casing sizes ip to 10-3/4"
    -With female T.H.D. is adaptable to all casing sizes up to 9-5/8"
  2. HYDRAULIC MUD MIXER
    DS-M30 Mud mixer Series Specifications
    Description - Hydraulic Mud Mixer
    Flow Range - To 15 GPM (56.7 LTR)
    Displacements - To .700 C.I.R.(11.47 CC's/REV.)
    Maximum Pressure to - 1500 PSI (104 BAR)
    Maximum Speed to - 5000 RPM
    Rotation - Bi-Directional
    Bearings - Roller
    Construction - Metal
  3. BIT SHARPENING SYSTEM
    DS220 Bit Sharpening System is a high power, pneumatic button bit sharpening tool, designed for hand-held use. The system features an efficient throttle and support handle, which give the operator an unprecedented level power and control, making DS220 the premier tool for even the most demanding job.
  4. MUD MIXER SPARE PARTS
  5. LEFT HAND AND RIGHT HAND ANGLE INDICATORS
    • Manual boom angle indicators and boom angle inclinometers are not affected by outdoor elements. These instruments are made tough and will not rust, freeze, or otherwise "hang up" like old fashioned pendulum style boom angle indicators. Like all of our instruments, each boom angle indicator is properly dampened for smooth reliable readings. Designed for easy mounting with two screws allows for quick and efficient retro-fitting in the field.

  6. BIT BASKET
    • The Bit Basket is used to secure DTH or RC Drill Bits during the uncoupling of a bit from the hammer, for replacement or maintenance. During this operation, the drill string with the hammer assembly is raised above the break-out system and the Bit Basket is secured in the top break-out, held in place by the break-out jaws. The Bit is then lowered in to the Bit Basket and safely uncoupled from the hammer.

      Every basket is made to specific size of a bit it will accommodate, therefore a 4" bit basket will not be suitable a 5" bit. Furthermore, in order to accommodate various shapes of the bits, different bit guides are welded inside the bit basket to insure a snug fit.

      At customer's request, if the Bit type is known in advance, we can supply Bit Baskets with guides factory welded in place, or supply the guides separately, to allow the driller to weld the guides on site according to the Bit used.

  7. COMPRESSOR AIR HOSES
    • DS Compressor Air Hose is an extra heavy-duty, high-pressure hose for pneumatic service in mining, construction, and industrial service, where working conditions are especially severe. 
      The tube is made out of a heat-resistant synthetic rubber, reinforced by spiral-plied steel wire.
      Reinforced with steel wire, this hose can withstand higher pressure than other types of air hose. Hose interior is smooth for unrestricted flow. Can be used indoors and out. Not rated for vacuum.
  8. FISHING TOOLS
    • Fishing Spear

      A Fishing Spear is used to recover from a well any equipment left there during drilling operations, such as a lost bit or drill collar or part of the drill string or to remove from an older well certain pieces of equipment (such as packers, liners, or screen liner) to allow reconditioning of the well. 
      It is usually the first recovery tool engaged when tools are broken off in the bore hole. The Fishing Spear screws directly on the drill rods and will endure gentle driving to aid in spearing the last tool. Fishing spears are easy to break loose if the drill tools cannot be recovered.

  9. CHAINS AND RIGGING
    • Proper dependable Rigging Hardware is a key safety factor in transport of Drilling Rigs and other heavy drilling/mining equipment.
      Whether you transport your equipment over a smooth highway or over rough terrain of a remote drilling site, Drilling Supply is your 1-Stop supplier of heavy-duty rigging equipment.
  10. HANDLED OILER
    • Features

      • 500ml fluid capacity.
      • Handled style with steel body
      • Zinc plated 30º Rigid Spout
      • Precision Double Ball Pump
      • Large, stable Base
      • Durable Epoxy finish to resist rust

Grid List

Set Ascending Direction

1-10 of 26

Page:
  1. 1
  2. 2
  3. 3