THREAD LOCKING COMPOUND

Specifications:

• Casing O.D. 4-1/2" (in): 10 joints each Bakerlok ® kit will lock
• Casing O.D. 5-1/2" (in): 6 joints each Bakerlok ® kit will lock
• Casing O.D. 6-1/2" or 7" (in): 4 joints each Bakerlok ® kit will lock
• Casing O.D. 7-5/8", 8-5/8", or 9-5/8" (in): 3 joints per each Bakerlok ® kit
• Casing O.D. 10-3/4", 11-5/8", or 13-5/8" (in): 2 joints per each Bakerlok ® kit
• Casing O.D. 16" or 20" (in): 1 joint per each Bakerlok ®
• One (1) Bakerlok ® case contains ten (10) kits
• One (1) Bakerlok ® kit contains:
  • One (1) 8 oz per can of Bakerlok ® thread-locking compound
  • One (1) Hardener vial
  • One (1) Applicator.

Features:

• Withstands high breakout torque: (field trials in temperatures ranging from 50 C (122F) through 400 Celsius (752F) at the bottom of the borehole, showed Bakerlok ® withstands superior torque loads, than a typical joint with 3-point welding with 2 inch beads.
• Easy Mixing: Bakerlok ® thread locking compound is specially formulated to ensure a stable mixing consistency in most operational environments.
• Long "Potlife" after mixing: Special formulation (catalyst and compound) in Bakerlok ® insures a "potlife" in excess of one hour; even at high.
• Unchanged by vibration: At 400 C (752F) Bakerlok ® treated joint was subjected to a steady breakout torque for 8 hours, white being subjected to continuous Air Hammer vibration. Breakout torque was increased to reach six times the prescribed 3,300ft-lb makeup torque, before the joint finally broke.
• High Lubricity: Tests were conducted using Bakerlok ® side by side with API modified thread dope. With the same amount of torque, the Bakerlok ® treated joint was cooler, than the joint treated with standard thread dope
• Leak-proof seal: Couplings made up with Bakerlok ® thread locking compound, using standard toque, were tested with water pressures in excess of the listed bursting force of the casing, without any signs of leakage.