Used Drilling Rigs for Sale

Used Geothermal Drilling Rig For Sale

Set up for overburden and hard rock drilling

for price and other info email at: sales@drillingsupply.info

Dimension  & Weight (Shipping-Transport)

Length: 6.09 m <> 20’-00’’
Width:  1.95 m <>   7’-4’’
Height:    2.28 m <>   9’-6’’
Weight:  approx. 8 845 kg <> 19 500 lbs

Undercarriage & Chassis

• Tracks mounted Heavy duty rubber belted  (Caterpillar)
• Track length:  3.48 m <> 137’’
• Track  shoes width:  500 mm <> 19.7” 
• Pressure applied brake system
• Heavy duty link profile
• Gradability    27° <> 50%
• Ground clearance  380 mm <> 15”
• Travel speed 2.6mph/ 4.4 km
• Heavy duty  hydraulic out-Riggers “with displacement pin for different ground level”
• PIPE RACK:  quick attachment  «Removable» (Cap: 40 drill pipes)

Diesel power unit  « Cummins »

• Cummins electronic diesel engine model  QSB4.5-4cyl. (24 volts) turbocharged water cooled
• Power  152 hp – 113 kw @  2000rpm
• Fuel consumption 11.3 L/hr <> 2.98 gal/hr
• Fuel tank  227 L. <> 60 galls
• Filtering system two stage (Primary @ security)
• Emission certification: U.S. EPA Tier 3, EU Stage III
• Integrated  control safety panel, 24 volts

Hydraulic power unit & components: «Rexroth/Sauer/Danfoss»

• Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.   
• Hydraulic tank capacity 227 L. <> 60 gall.
• Hydraulic oil cooler
• Filtration system ( 5 micron )
• Integrated safety system
• Body valves assembly for complete  controls (Tram, positioning and drilling)
• Automatic lubricator for the down the hole hammer
• Parker « seal lock » hose and fittings
• Integrated safety system, over heat, low levels etc.
• Auxiliary hydraulic set-up complete set up «exit 78 hp» and space for mud pump operating Model CLM 7½x10’’ 

Drilling Mast & Feed assembly

• Dump (45° under, 75° above from the vertical)
• Mast structure HD designed for drill pipe of   (3.00 m <> 10’)
• Top drive free travel length «stroke» ( 4.57 m <> 15’)
• Feed system hoisting and pull-down power is provided by leaf-chain that use a powerful hydraulic cylinder controlled hydraulically for accurate trust
• Pull down force  (42 000 Lbs <> 186.85 KN
• Pull back capacity (42 000 Lbs <> 186.8 KN)
• Top drive mounting plate is equipped with urethane anti-wear slides
• Sliding plate is equipped with 90⁰ frontal tilt casing collection
• Jib hydraulic winch 1 200 lbs <> 544 kg
• Total pull back force with extra winch (43 200 lbs <> 192.16 KN)
  
  A) Rotating  Head: model GR9550C
  
  
• Over 30 years proven rotary drive unit equipped with two  (2) hydraulic motors
• Torque capacity 6000 LBF-ft / 3000 psig <>  8135 Nm / 209.9 bar
• Rotation speed  0 – 80 rpm
  
  B) Rod clamps & Break-out: hydraulic jaws
  
  
• Hydraulic centralizer  with  retractable jaws with max. opening of (8 3/4"–222 mm)
• Hydraulic « Breakout » system
• Manual guide centralizer
  
  C) Deflectors
  
  
• Deflector/collector #1: moving on feed to always be on top on the casing
• Deflector/collector #2: standard fixed under the drilling table

Water injection : FMC  pump model A04

• Duplex pistons pump  (Water, water mist, foams, bentonite, etcc…)
• Volume:  0 to 34 L/min (0 to 9 gals/min)
• Pressure: 0 to 850 psig ( 58 bar)
• Revolution: 500 rpm
• Complete filtering system

Remote control Panel

• Ergonomic fully electric «Remote control»
• Aluminum corpus, heated inside to avoid condensation

Mud Pump CLM 7.5”x10” MSPA (Option)

• 0-180 g/min. (single cylinder)
• 0-550 psig

Miscellaneus

• Rig Color: «GREEN»
• Working hours: 200 h