Products

Visit our online store today!

Visit our youtube channel

Safe and fast drilling rig shipping!

View our gallery of products images

Surface diamond core exploration drill rig

Track Mounted Diamond Core Drilling Rig DS6100c

DIAMOND CORE DRILLING MACHINE DS6100 C

 

High performance coring exploration drill rig DS6100 series.

These series drill rigs are designed with the end user in mind. You will be able to benefit from its unique features optimized for high performance, efficiency and reliability in any operational environment.

 

 

 

There are three available configurations:

  1. Truck-mounted, rear operating platform, rod handler, all hydraulic chuck drive core drill.
  2. Track-mounted, front driver console, rear operating platform, rod handler, all hydraulic chuck drive core drill, specially designed for diamond core drilling up to the rated specifications.
  3. Skid mounted, enclosed shack, all hydraulic chuck drive core drill and specially designed for diamond core drilling up to the rated specifications.

Some features include:

  • Burst Valve on Feed Cylinder This safety feature prevents the feed cylinder from collapsing in the event of a catastrophic failure in the hydraulic hoses.
  • Neutral Lock on Chuck/Rod Clamp and Rotation levers This safety feature is now standard on all our models of drills. It will lock the levers to neutral unless the operator is pushing a button on top of the lever. This is to help reduce the chance of damaging or losing a rod string by switching too fast from one direction of rotation to another or from passing too fast from open chuck to open clamp.
  • Lock Valve on Rod Handler’s Finger Cylinder This safety feature is now standard on all our models of drills with a rod handler. It will prevent the hand from opening when holding a rod if the engine is shut down.
  • Dual Electric Master Switch This safety feature is now standard on all our models of drills. It will let you either completely cut power for all the drill and the engine or isolate only the engine and keep the lights and the power sockets active.
  • Relief Valve on Pull Cylinder This safety feature is now standard on all our models of drills. It will prevent an operator from trying to extend the mast extension by using the pull cylinder. It will also make the pull cylinder collapse if an operator tries to retract the mast extension while the pull cylinder is extended.
  • Hinged Table Lock This safety feature is now standard on all our models of drills. This device is attached to the drill mast, close to the rod clamp, and can be flipped on the mast rail to prevent the head from sliding too low when doing maintenance on the rod clamp.
  • HSS Style Rod Comb This new style of rod comb replaces the previous welded and modular models. It will let you easily reconfigure the type of rods being stacked by changing in which row the fingers are bolted. Standard rows are for N, H and P rods.
  • Floor Rod Reference This option is only available for drills with a rod rack. It is a simple guide on the floor that gives a reference to place the first row of rods at the right place and angle.
  • Casing Clamp This clamping device is installed under the rod clamp and eliminates the need to use pipe wrenches to break casing under the mast. When combined with the mast dump system, it makes it easier to install more than one size of casing in the ground.
  • Casing Puller  This system puts the rod clamp on its own slide with 12 inches of travel and 40,000lbs of pull power to give you extra strength when dealing with a stuck drill string.
  • Remote Mast Extension Locking Mechanism This system eliminates the need for the helper to climb on the drill’s roof to install or remove the pin that locks the mast extension in place. The pin is now permanently fixed on the extension and a system of latches and a lever at waist level on the mast will lock and unlock the extension.
  • Heating System on Engine Coolant This system circulates the engine’s coolant fluid in a combination of hoses snaking under the floor and/or heating units under the main console and behind the rod handler operator.

Request Quote



Please contact us If you have any questions and we will be happy to provide you additional information on our drilling rigs on platform.
Ask for a quotation today and see why drillers around the world trust us.

Specs and Features of the Diamond Core Drilling Machine DS6100 C

[-] Collapse all. [+] Expand all.

[-] Model

DS6100 C

[-] Type

Track-mounted.
Front driver console.
Rear operating platform.
Rod handler.
All hydraulic chuck drive core drill, specially designed for diamond core drilling up to the rated specifications.

[-] Carrier

CATERPILLAR 320CL

[-] Undercarriage & Chassis

500mm triple grouser track shoes
Max. travel speed 3 mph (4.8 km/h)
Maximum slope 20%
Maximum cross fall 10%

[-] Hole Depth Capacity

BQ - 8,829 ft(2,691 m) with 55.6 mm / 2.19'' rod size
NQ - 7,027 ft(2,142 m) with 69.9 mm / 2.75'' rod size
HQ - 4,606 ft(1,404 m) with 88.9 mm / 3.50'' rod size
PQ - 2,952 ft(900 m) with 114.3 mm / 4.50'' rod size

[-] Power Unit

Cummins QSB6.7 260HP Tier3 diesel engine with oil radiator & auxiliary drive

[-] Fuel tank

255 liters (67 US gal.)

[-] Working temperatures

Constant operation at the temperatures various between - 45 to + 50 degrees Celsius (- 49 F to 122 F).

[-] Weight and Dimension

Weight - 22,800 kg (50,000 lbs)
Length - 361 in (9179 mm)
Width - 119 in (3035 mm)
Height - 135 in (3428 mm)

[-] Drill Mast

Capacity to drill between 90° and 45°.

[-] Pump drive

FUNK triple pump drive (series 28000) with ratio 1.27:1

[-] Rotation head

Rotation head type with chain drive head for hydraulic chuck (customer choice) ratio 12/24 on "H" size head, and 12/29 on "P" size head. Max RPM: 1,350.

[-] Transmission

FUNK 4-speed transmission (Ratio 1st 6.63:1, 2nd 3.17:1, 3rd 1.72:1. 4th 1:1)

[-] Head table

Hydraulic cylinder is directly coupled to the rotation head carriage. The travel is 3m (10ft) or 3.3m (11ft). At 4,500PSI, push capacity is 13,526 kg (29,820 lbs) and pull capacity is 25,650 kg (56,548 lbs).

[-] Pull cylinder

Hydraulic cylinder with 16,833 kg (37,110 lbs) of maximum pull at 4,500PSI.

[-] Water pump

Standard BEAN 435 or PRATISSOLI KF40 (as per customer choice).

[-] Rod clamp

BOYLES style for "B" to "P" sizes.

[-] Wireline winch

The capacity of the wireline winch is 3,500m (11,480ft) for 3/16 in wireline rope, depending on the option chosen.

[-] Hydraulic System

Full flow 25 micron BETA rated return oil filtration.
Water/oil, air/oil hydraulically motorized (optional) and air/oil (optional, installed on the diesel engine) hydraulic coolers.

[-] Hydraulic tank capacity

407 liters (1107 US gal.)

[-] Maximum pull capacity

42,483 kg (93,658 lbs) @ 4,500 PSI with feed and pull cylinder.

Request Quote