Products

Visit our online store today!

Visit our youtube channel

Safe and fast drilling rig shipping!

View our gallery of products images

Blast HOLE drilling rigs

Blasting Drilling Rig


Drilling Supply blast-hole drilling rigs are designed to suit all your drilling needs ranging from civil and construction Blast Hole Drill Rig works to heavy-duty mining projects.  Our rigs include crawler-mounted diesel engine and electric engine models.

All our blast hole models feature a sturdy, well designed chassis. Its structure is the key element for the durability of this rig which provides superior endurance and lower maintenance cost.

Traction: Even on the roughest terrains, the strong undercarriage track frame, which features independent oscillation, will allow smooth drilling and improved stability.

Feed Mast: From its unique conception, the Rockmaster feed system provides superior rigidity resulting in higher drilling accuracy ranging from 3 in (73 mm) to 8 3/4 in (222 mm). The ultra rigid feed beam has been specifically conceived to provide long lasting drilling service.

 

[-] Compare our Rockmaster blas-hole drilling rigs!

[-] Collapse all. [+] Expand all.

[-] Weight and Dimension

  RM615-A B10-A B12-A
Weight 17,463 kg<>38,500 lbs 32885kg <> 72500lbs 33792kg <> 74500lbs
Length 9.70m<>31’-10” 13.05 m <> 42’-10” 13.05 m <> 42’-10”
Width 2.59m<> 8’- 6” 2.89 m <> 9’- 6” 2.89 m <> 9’- 6”
Height 3.21m<>10’- 6” 3.55 m <> 11’- 6” 3.55 m <> 11’- 6”

[-] Mobile-Undercarriage

  RM615-A B10-A B12-A
Track length 4.10 m <> 13.48’ 4.26m <> 14.0’ 4.26m <> 14.0’
Triple grouser shoes width 381 mm <> 15” 457mm <> 18” 457mm <> 18”
Independent tracks oscillation ±10° ±8° ±8°
Ground clearance  431 mm <> 17” 381mm <> 15” 381mm <> 15”
Travel speed 3.2 km/h <> 2.0 mph 4.8 km/h <> 3 mph 4.82 km/h <> 3 mph
Gradability  - 27° <> 52% (Engine max. 20°<> 36%) 27° <> 52% (Engine max. 20°<> 36%)
Max. theoretical traction effort  - 24947 kg <> 55,000lbs   24947 kg <> 55,000lbs  

[-] Diesel power unit

  RM615-A B10-A B12-A
Model Cummins QSK-19 ECM QSK-19 ECM
Power  160 hp @ 2000 rpm 630hp @ 1800rpm 700 hp @ 1800 rpm
Fuel consumption (Full rate) 11.2 L/h <> 2.96 gal/h - -
Fuel consumption (Operation) 7.2 L/h <> 1.9 gal/h 67.68L/hr <> 17.88gall/hr 74.87L/hr <> 19.78gall/hr
Fuel tank  151 L <> 40 galls 1136 L <> 300 galls 1136 L <> 300 galls
Filtering system  Two stage (Primary @ security) Two stage (Primary @ security) Two stage (Primary @ security)

[-] Compressor unit (Dual performance)

  RM615-A B10-A B12-A
Type  -
  • Sullair
  • Heavy Duty, Energy efficient 900cfm x 500psi x 1800rpm
  • Heavy Duty, Energy efficient 1000cfm x 350psi x 2100rpm
  • Sullair
  • Heavy Duty, Energy efficient 1050cfm x 500psi x 1800rpm
  • Heavy Duty, Energy efficient 1165cfm x 350psi x 2100rpm
Rating condition  - Sea level & 20° C Sea level & 20° C
Cooling  - Air cooled radiator, charge-air and oil cooler Air cooled radiator, charge-air and oil cooler
Intake modulation  - Full range control for partial load Full range control for partial load
Intake filters  - Two stage dry type Two stage dry type
Controls  - Pressure gauge, temperature gauge, air filter maintenance indicator Pressure gauge, temperature gauge, air filter maintenance indicator
Safety device -
  • High discharge temperature
  • High receiver pressure
  • High Inter stage temperature
  • High Inter stage pressure
  • Low oil pressure
  • Minimum pressure valve
  • Pressure relieve valve
  • High discharge temperature
  • High receiver pressure
  • High Inter stage temperature
  • High Inter stage pressure
  • Low oil pressures
  • Minimum pressure valve
  • Pressure relieve valve

[-] Hydraulic power unit & components: (Rexroth/Sauer/Danfoss)

  RM615-A B10-A B12-A
Pump drive  Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) piston pump dedicated for dust collector Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) piston pump dedicated for dust collector
Hydraulic tank capacity  207 L <> 80 gall 432 L <> 114 gal 432 L <> 114 gal
Filtration system  5 micron  5 micron  5 micron 
Fittings and connectors  «Seal lock» type "OSFS & ORB" type "ORFS-ORBS"
Hydraulic hoses  «Seal lock» Standard heavy duty Standard heavy duty
Camera infra-red vision - 1 front / 2 rears 1 front / 2 rears
Air system supply  500 psig Dual mode 500psi & 350psi Dual mode 500psi & 350psi
Integrated safety system  Over heat, low level, etc. Over heat, low level, etc. Over heat, low level, etc.

[-] Automatic lubricator (oiler) for the down the hole hammer

  RM615-A B10-A B12-A
Type  Hydraulic piston pump system, Metering adjustment,Fully automatic   Hydraulic piston pump system, Metering adjustment,Fully automatic   Hydraulic piston pump system, Metering adjustment,Fully automatic
Reservoir  22.7 L. <> 6 gall - -

[-] Water injection system

  RM615-A B10-A B12-A
Pump model Model FMC L04 Model FMC L04 Model FMC L04
Type  Double piston pump Double piston pump Double piston pump
Volume 34 L/min <> 9 gal/min   34 L/min <> 9 gal/min   34 L/min <> 9 gal/min  
Pressure  38 bar <> 550 psig 38 bar <> 550 psig 38 bar <> 550 psig
Revolution  speed  500 rpm 500 rpm 500 rpm
Water tank "Stainless steel"  757 L <> 200 gall 1136 L <> 300 gall 1136 L <> 300 gall
Winter anti-freeze tank 19 L <>5 gal - -

[-] Boom positioning

  RM615-A B10-A B12-A
Boom single section - single section  single section 
Extension 24” <> 0.61 m - -
Boom swing  (15° LHS) (30° RHS) 30°/10° 30°/10°
Tilt inclination:   ±15° below, ±45° above the horizontal ±15° below, ±45° above the horizontal ±15° below, ±45° above the horizontal
Dump ±45° under, ±75° above from the vertical ±45° under, ±75° above from the vertical ±45° under, ±75° above from the vertical
Oscillation  Left/Right  (-30°/+45° pin #1) (+45°/-5° pin #2) -20° to +50° from vertical pin #1
+50° to -6° from horizontal pin #2
-20° to +50° from vertical pin #1
+50° to -6° from horizontal pin #2
Hydraulic cylinders  Equipped with integrated safety locks Equipped with integrated safety locks Equipped with integrated safety locks

[-] Drilling Mast & Feed assembly

  RM615-A B10-A B12-A
Mast structure  HD designed HD designed HD designed
Feed system hoisting and pull down power Provided by link-chain that use a hydraulic powered gear box controlled hydraulically for accurate trust Provided by link-chain that use a hydraulic powered gear box controlled hydraulically for accurate trust Provided by link-chain that use a hydraulic powered gear box controlled hydraulically for accurate trust
Pull down force  21,000 lbs <> 93.4 KN 17500 lbs <> 77.8  KN 17500 lbs <> 77.8  KN
Pull back capacity  21,000 lbs <> 93.4 KN 17500 lbs <> 77.8  KN 17500 lbs <> 77.8  KN
Jib winch capacity  1200 lbs <> 544 kg 1200 lbs <> 544 kg 1200 lbs <> 544 kg

[-] Carrousel

  RM615-A B10-A B12-A
Carousel   (6) rods (3½’’ dia. x 16’-4”’ long <> 89mm x 5m) (6) rods 20' long <> 6.00m (6) rods 20' long <> 6.00m
Stars "set"  from 3" or 4" dia. rods from 3½" to 5" dia. rods from 3¼" to 5" dia. rods
Operation  All function are hydraulically operated All function are hydraulically operated All function are hydraulically operated
Pipe loading  Gate for loading pipe in horizontal position Gate for loading pipe in horizontal position Gate for loading pipe in horizontal position

[-] Drill Head

  RM615-A B10-A B12-A
Model Euro-drill RH900 Euro-drill RH900 Euro-drill RH900
Torque capacity motor 95 5015lbf-ft <> 6800Nm - -
Rotation infinity variable speed  0 - 100 rpm 0 - 100 rpm 0 - 100 rpm
Torque capacity motor 98 8113lbf-ft <> 11000Nm - -
Rotation infinity variable speed  0 - 86 rpm - -
Working pressure  - 3600 psi 3600 psi
Swivel passage  50.8 mm <> 2” 50.8 mm <> 2” 50.8 mm <> 2”

[-] Drilling table

  RM615-A B10-A B12-A
Swivel break-out retractable jaws Swing torque  22436 lb Swing torque  22436 lb Swing torque  22436 lb
Clamps retractable jaws Clamps hold force 58560 lb Clamps hold force 58560 lb Clamps hold force 58560 lb
Max. opening   222 mm <> 8¾'' 222 mm <> 8¾'' 222 mm <> 8¾''

[-] Noise less cab "ROPS"

  RM615-A B10-A B12-A
Fully thermal  - Summer-Winter Summer-Winter
Vibration  - Isolated seat and seat belt Isolated seat and seat belt
Sound insulation environment - Less than 85 dBa Less than 85 dBa
Functions  - All function are controlled from cab All function are controlled from cab

[-] Panel view

  RM615-A B10-A B12-A
  - Display all pressure/ shutdown alarm/ active controls/ meters Display all pressure/ shutdown alarm/ active controls/ meters

Please contact us If you have any questions and we will be happy to provide you additional information on our blasting drilling rigs.
Ask for a quotation today and see why drillers around the world trust us.